Luna Light Acrygel №10, 13 ml

LIQUID GEL LIGHT ACRYGEL is an innovative material for strengthening, leveling and nail extension. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate NEMA (approximately 20–30%), the main component of base coatings. Such a gel can completely replace the base.

Features:

Wavelength for polymerization - 365–405 nm.
UV/LED lamp power - 36–48 W.
Permissible coating thickness - 0.5 mm at the edge of the nail, 1 mm at the apex.
Acid-free, has an average consistency.
Has an average pigmentation, covers the free edge.
Full polymerization takes place in 120 seconds.
Suitable only for strengthening the nail and extension.
It has good cushioning.
When strengthening with this gel, you need to file the natural nail.
Requires a Rubber Base substrate.
It can be additionally heated to make the gel thinner.

Application method:

STRENGTHENING:

Removal.
Do not file the nail shape or leave 2 mm in length, which we will remove after leveling.
Use a 220-grit file to file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100-grit buff.
Do a manicure.
If you work with removers, wash your hands with soap after working with them.
Degrease the nail with Nail Prep. Do two approaches. Use 4 napkins for this (1 napkin for 5 fingers). First approach: wipe the surface of the nail. The second approach: take an orange stick, put a napkin on it and wipe everything in the cuticle area and in the sinuses.
We use a primer if desired, but if the base for the base has sufficient acidity, then it is not needed.
The base with Rubber base is best applied with a flat gel brush. The movements should be rubbing. We draw all the sinuses of the nail and dry in the lamp for 60 seconds.
We erase the stickiness.
We level. If we level with gel, we make an indentation from the cuticle of 0.5–1 mm. Dry in the lamp for 60 seconds.
We file the form after leveling. This is necessary so that a thickness forms on the edge of the nail that will hold the free edge.
If the nail is thin, it can curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no peeling of the material. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
After filing, remove the stickiness and cover with gel polish.
Cover with Top. Dry for 120 seconds. After drying, do not wipe with anything, as the shine may be lost.
* The product packaging may differ from the one shown in the photo