Luna Premium Gel 18, 30ml

Classic Premium extension gel is a polymer light-curing material that, due to its strength, allows you to significantly lengthen the nail plate. It contains photoinitiators that start the polymerization process when the material is exposed to ultraviolet light of a certain wavelength.

Features:

It is acid-free.
It has shock absorption, does not crack when hit.
It has an average consistency.
It has an average pigmentation, covers the free edge.
Suitable for the “extension without filing” technique.
Suitable for extension “on top forms”.
Does not cause burning in the lamp.
It becomes thicker in the cold, and thinner in the heat.
Thixotropic - becomes thinner if you move the brush while working.
It can be additionally heated to make the gel thinner.
Harder than 1 mm thick. If the thickness is less than 1 mm, it may bend a little, but this does not affect the wear.
Does not shrink and holds the arch well.
Requires a Rubber Base substrate.
Wavelength for polymerization 380-420 nm.
UV/Led lamp power 36-48W.
Permissible coating thickness 0.5 mm at the end/ 1 mm at the apex.
Full polymerization 120 seconds.
Application method:

STRAINING

Removal.
Do not file the nail shape or leave 2 mm long, which we will remove after leveling.
File with a 220 grit file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit buff.
Do a manicure.
If we work with removers, wash our hands with soap after working with them.
Degrease the nail with Nail Prep. We do two approaches. We use 4 napkins for this (1 napkin for 5 fingers). The first approach: wipe the surface of the nail. The second approach: take an orange stick, put a napkin on it and wipe everything in the cuticle area and in the sinuses.
We use a primer if desired, but if the base for the base has sufficient acidity, then it is not needed.

The base with Rubber Base is best applied with a flat gel brush. The movements should be rubbing. We draw all the sinuses of the nail and dry in the lamp for 60 seconds.
We erase the stickiness.
We level it. If we level it with gel, we make an indentation from the cuticle of 0.5–1 mm. Dry in the lamp for 60 seconds.
File the form after leveling. This is necessary so that a thickness forms on the edge of the nail that will hold the free edge.
If the nail is thin, it can curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no peeling of the material. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
After filing, erase the stickiness and cover with gel polish.
Cover with a top coat. Dry for 120 seconds. After drying, do not wipe with anything, as the shine may be lost.
In case of violation of the hermetic packaging of these goods, it is impossible to refuse the purchase and sale agreement within 14 days for health or hygiene reasons.
* The packaging of the product may differ from that shown in the photo