Luna Rubber Base, 13 ml

RUBBER BASE is a transparent, universal, elastic base for leveling nails.

Features:

- Has an acidity of 3–4 pH.

- Minimal shrinkage is possible during wear due to the elasticity of the base.

- May cause a feeling of warmth and burning on injured and very thin nails (not on healthy ones).

- Can be used as a base for all types of coatings and for building up on gel tips.

- Medium consistency, self-leveling.

- The power of the lamp for drying the base is 36–48 W. The lamp must be original.

- The basic rule when leveling: the thickness at the edge of the nail should be 0.5 mm.

- Ensures wear without peeling for 3–4 weeks.

- Excellent removal both by filing and using a liquid.

- Suitable for self-leveling on short nails.

- Hypoallergenic and has a neutral odor.

Application method:

Product shelf life: 24 months. Store opened for no more than 18 months.

Removal.
Do not file the nail shape or leave 2 mm long, which we will remove after leveling.
File the nail with a 220-grit file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100-grit buff.
Do a manicure.
If we work with removers, wash our hands with soap after working with them.
Degrease the nail with Nail Prep LUNAmoon. We do two approaches. We use 4 napkins for this (1 napkin for 5 fingers). First approach: wipe the surface of the nail. Second approach: take an orange stick, put a napkin on it and wipe everything in the cuticle area and in the sinuses.
Apply Ultrabond LUNAmoon (optional). Before applying, it is important to wipe the brush with a lint-free napkin to remove excess material. Apply Ultrabond LUNAmoon with a semi-dry brush to 5 fingers. Wait 1 minute for it to be absorbed into the nail plate.
The Rubber Base LUNAmoon base is best applied with a flat gel brush. The movements should be rubbing. Draw all the sinuses of the nail and dry in the lamp for 60 seconds.
Erase the stickiness.
Level it with Strong Base LUNAmoo. Dry in the lamp for 90 seconds.
File the form after leveling. This is necessary so that a thickness forms on the edge of the nail that will hold the free edge.
If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no peeling of the material. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
After filing, erase the stickiness and cover with a thin layer of gel polish or camouflage base.
Cover with a top coat. Dry for 120 seconds. After drying, do not wipe with anything, as the shine may be lost.
* The product packaging may differ from the one shown in the photo